Fission Type Infrared Temperature Sensor

Fission Type Infrared Temperature Sensor

Time:2020-06-05 15:43:31

Fission Type Infrared Temperature Sensor
· Measurements to 300°C
· Ambient Temperature Operating Range: 0 to 120°C
· Output: 4 to 20 mA or E-Type or K-Type
· non-contact
· interface directly to most of all meters, controllers, dataloggers
· Fast Response with High Stability

General Specifications
Temperature Range: 0~300℃ (See To Order chart )
Supply Voltage: 24 VDC
Output: 4 to 20 mA
Field of View:  15:1
Accuracy: ±2°C or 1%, whichever is greater
Repeatability: ±0.5°C or 0.5%, whichever is greater
Emissivity Setting Range: pre-set to 0.95
Response Time:  100 ms
Spectral Range: 8 to 14 μm
Maximum Current Draw: <50 mA
Construction: Stainless Steel 304
Dimensions: ø12x length 50 mm
Weight: 100g with 2 m(7') cable
Environmental Rating: IP65

Maximum distance and size of measurement point
Size of measurement target and optical features of infrared thermodetector determine maximum distance between measurement target and measurement head. To prevent measurement error, the measurement target should fill field of view of probe as much as possible. Therefore, always keep measurement point smaller than measurement object or at least the same size as measurement target.
When adjust measurement target and measurement head, ensure that optical path is barrier free, as shown below:

Ordering information IRT(Field of View)-FT(Pre-Calibrated Temperature Range)(Output)-Cable Length.
Ordering Examples: IRT15-FT300A-02Field of View:15:1, 0 to 300°C, 2m

Contact:Miss yang

Address:No.216 Gangye Road, Xiaokunshan Town, Songjiang District, Shanghai
WeChat scan concerns us: